Aim Technologies

Additional Information:

• Delivery Time: Within 20 Days

Aim Technologies Offering you a complete choice of products which include Semi Automatic PET Blow Moulding Machine, pharma bottle blow machine, water bottling machine and mineral water bottling plant.

We had developed this Semi Automatic Pet Blow Molding Machines for getting higher production in minimum investment. We had simplified the technology of the Semi Automatic Pet Blow Molding Machines which will help our buyer to use and maintain on his own (without our help).This machine is very useful to blow water bottle up to 2ltr, and pharmaceutical bottle up to 1ltr.

We are manufacturer of pet blowing machine for mineral water bottles and clod drinks bottles with good experience and technical.

Silent Features:

• Manual feeding of two performs into the Infrared Convey or device for heating.
• Easy and safe to operate.
• Lower power consumption.
• Use of the best spares from renowned manufacturers like Mercury, Ultra etc., ensures best product quality.
• Easy change of the mould.
• Programmable process control by PLC.
• Above all our fast and efficient after sales service gives us the cutting edge over competitors.

  The above specifications are subject to change with out prior notice.

ü  Total Connected Power Required-11 kW 3

Aim Technologies Offering you a complete choice of products which include Semi Automatic PET Blow Moulding Machine, pharma bottle blow machine, water bottling machine and mineral water bottling plant.

We had developed this Semi Automatic Pet Blow Molding Machines for getting higher production in minimum investment. We had simplified the technology of the Semi Automatic Pet Blow Molding Machines which will help our buyer to use and maintain on his own (without our help).This machine is very useful to blow water bottle up to 2ltr, and pharmaceutical bottle up to 1ltr.

We are manufacturer of pet blowing machine for mineral water bottles and clod drinks bottles with good experience and technical.

Silent Features:

• Manual feeding of two performs into the Infrared Convey or device for heating.
• Easy and safe to operate.
• Lower power consumption.
• Use of the best spares from renowned manufacturers like Mercury, Ultra etc., ensures best product quality.
• Easy change of the mould.
• Programmable process control by PLC.
• Above all our fast and efficient after sales service gives us the cutting edge over competitors.

Phase 415 v. For Machine

ü  Connected Load for Auxillaries-18 Kw 3 Phase 415 v.

ü  Total-18+11=29 Kw, 40 H.P.

ü  Consumption load is 65% Of Connected=20 kW. (26HP) 0.15 Paisa per bottle electrical cost.

Additional Information:

• Delivery Time: 15 Days

Additional Information:

• Delivery Time: 15 days

Aim Technologies Offering you a complete choice of products which include Automatic PET Blow Moulding Machine, pharma bottle blow machine, water bottling machine and mineral water bottling plant.

We had developed this Automatic Pet Blow Molding Machines for getting higher production in minimum investment. We had simplified the technology of the Semi Automatic Pet Blow Molding Machines which will help our buyer to use and maintain on his own (without our help).This machine is very useful to blow water bottle up to 2ltr, and pharmaceutical bottle up to 1ltr.

Silent Features:

• 3 KVT ( Output 1800 bph)
• Automatic feeding of three performs into the Infrared Convey or device for heating.
• Easy and safe to operate.
• Lower power consumption.
• Use of the best spares from renowned manufacturers like Mercury, Ultra etc., ensures best product quality.
• Easy change of the mould.
• Programmable process control by PLC.
• Above all our fast and efficient after sales service gives us the cutting edge over competitors.

Additional Information:

• Delivery Time: Within 3 Week

·         Total Electrical wiring up to panel of the machine

·         GI piping (0.5 inch) for Blowing machine & Dryer

·         PVC piping (0.5 inch) for Chiller to Blowing conveyor

·         1000 Liter HDPE tank, 0.5HP pump, PVC (1 inch) piping for Compressor

·         Raw material for Testing and Trial

Additional Information:

• Delivery Time: Within 1 Month

Additional Information:

• Delivery Time: 30 Days

Additional Information:

• Delivery Time: Within 5 Weeks

Additional Information:

• Delivery Time: Within 25 Days

Total Power     :            50 KW CONNECTED LOAD ( actual consumption 60 % appx )

 Production       : PET Bottle 28mm neck maximum 200 - 1000 ML,  Mineral water bottle 

 Size                 :           L X W X H :  8.5 x 10 x 7.5 feet appx

 Weight            :                       1500 Kg appx

 Operator         :           One person required to run machine

 Pneumatic        :           SMC

 Mould Locking:           Hydro Pneumatic Type  

 Blowing Valve :           Dif ram Type 

 Mould             :           Two  Piece Mould        Three Cavity

This machine is entirely pneumatic 

Mould will be locked through Hydro Pneumatic Cylinder  

Entire machine pneumatic parts are of SMC only

 The blowing High Pressure and Low Pressure valve are difram type make so for longer production there will be no jam

The Lubrication system given inside machine for  Ty-bars where gunmetal buses used

The microprocessor is simpler normally used in semi gives production cycle time also give us error report for which reason machine get stop.

Extra Filter given for HP and LP line to continuous supply of clean and dry air

Additional Information:

• Delivery Time: 20 Days

·         Total Electrical wiring up to panel of the machine

·         GI piping (0.5 inch) for Blowing machine & Dryer

·         PVC piping (0.5 inch) for Chiller to Blowing conveyor

·         1000 Liter HDPE tank, 0.5HP pump, PVC (1 inch) piping for Compressor

·         Raw material for Testing and Trial

Additional Information:

• Delivery Time: 15 days

ü  The above specifications are subject to change with out prior notice.

ü  Total Connected Power Required-11 kW 3 Phase 415 v. For Machine

ü  Connected Load for Auxillaries-18 Kw 3 Phase 415 v.

ü  Total-18+11=29 Kw, 40 H.P.

ü  Consumption load is 65% Of Connected=20 kW. (26HP) 0.15 Paisa per bottle electrical cost.

Additional Information:

• Delivery Time: Within 15 Days

Additional Information:

• Delivery Time: 4 Weeks

Additional Information:

• Delivery Time: Within 30 Days

Additional Information:

• Delivery Time: 5 Weeks

Aim Technologies  manufactures excellent quality Automatic PET Blow Moulding Machines for PET bottle production. Our Automatic PET Blow Moulding Machines have wider wide-mouth capability, faster production rates, and shorter changeover times. Also have features such as preferential heating or heat-setting capability. Our Two stage Plastic PET machines can make bottles from round to flat bottle styles. With our two stage Automatic PET Blow Molding Machines you can produce various different shaped PET containers, such as mineral water bottle, beverage bottle, cosmetics bottle, medicine bottle, pesticide bottle, edible oil bottle, milk bottle, Juice bottle and many more types of Plastic PET Bottles 

On Line / Off Line Pet Stretch Blowing Machine For Bottles  With Infrared Heating System & 360 Degree Preform Neck Cooling System With  Servo Control System.

(MODEL: AIM-OL-2400)

 Heating load : 12 KW 

Additional Information:

• Production Capacity: 10
• Delivery Time: 30 Days

Additional Information:

• Delivery Time: Within 25 Days

Aim Technologies Offering you a complete choice of products which include Semi Automatic PET Blow Moulding Machine, pharma bottle blow machine, water bottling machine and mineral water bottling plant.

We had developed this Semi Automatic Pet Blow Molding Machines for getting higher production in minimum investment. We had simplified the technology of the Semi Automatic Pet Blow Molding Machines which will help our buyer to use and maintain on his own (without our help).This machine is very useful to blow water bottle up to 2ltr, and pharmaceutical bottle up to 1ltr.

We are manufacturer of pet blowing machine for mineral water bottles and clod drinks bottles with good experience and technical.

Silent Features:

• Manual feeding of two performs into the Infrared Convey or device for heating.
• Easy and safe to operate.
• Lower power consumption.
• Use of the best spares from renowned manufacturers like Mercury, Ultra etc., ensures best product quality.
• Easy change of the mould.
• Programmable process control by PLC.
• Above all our fast and efficient after sales service gives us the cutting edge over competitors.

·      


   Total Electrical wiring up to panel of the machine

·         GI piping (0.5 inch) for Blowing machine & Dryer

·         PVC piping (0.5 inch) for Chiller to Blowing conveyor

·         1000 Liter HDPE tank, 0.5HP pump, PVC (1 inch) piping for Compressor

·         Raw material for Testing and Trial

Additional Information:

• Delivery Time: 1 month