Aim Technologies

We have introduced the bottle blowing machine with book type mold closing technology which reduces the bottle blowing cost to only 8 paise whereas all blowing machines consume (18-20) paisa per bottle blowing cost. Also important to note that our machines are able to produce double the output of bottles for the same power consumed by other machines.  Our PET Blowing Machine have:
High Productivity,
Low Power Consumption,
Easy Operation,
Low maintenance costs,
Precise and Programmable controls with Human Machine Interface (HMI),
Low cost of Blowing,
operator safety,
secondary compression to eliminate parting line.
Machine construction materials are reliable and the best in the world.
Request
Callback  Additional Information:
Item Code: DSA2C53
Production Capacity: 25 Units Per Month
Delivery Time: One Week

Bottle Blowing Machine
By Aim Technologies – From 900 BPH to 12,000 BPH

Aim Technologies is a leading manufacturer of Bottle Blowing Machines for mineral water plant, juice, soft drink, and other PET bottle applications. We offer a wide range of blowing machines starting from 900 Bottles Per Hour (BPH) up to 12,000 BPH, suitable for different production needs. A Bottle Blowing Machine converts PET preforms into bottles using heat and high-pressure air. These bottles are then used for filling water, juices, carbonated drinks, etc.

We manufacture different types of blowing machines to match every requirement:
2 KVT – Ideal for small-scale production (approx. 1000 BPH)
3 KVT – Mid-range capacity (up to 2000 BPH)
4 KVT – Popular choice for medium capacity plants (up to 4000 BPH)
5 KVT – Higher production needs (up to 7500 BPH)
6 KVT – Large scale and industrial usage (up to 12,000 BPH)

Aim Technologies is a leading 4 KVT Pet Blowing Machine manufacturer, exporter in Gujarat, India.

We designed this 4 KVT Pet Blowing Machine to produce more with less money invested. In order for our customer to be able to operate and maintain the fully-Automatic Pet Blow Molding Machine independently (without our help), we simplified its technology. This easily accessible machine can blow up to one liter of drink, water, and many other bottles.

We are an experienced and technically skilled manufacturer of pet blowers for mineral water and cold drink bottles.

( Fully Pneumatic Toggle Type 3 Cavity Automatic Pet Stretch Blow Moulding Machine)

This Machine is Specially Designed for Beverage other Applications .

 Controlled by high Performance SIEMENS PLC.

 Toggle Clamping Mechanism Operated by Pneumatic Cylinder Which Consumes. Low Air & gives good locking force.

 

 Due to Servo Clamping Unit Mould Change Over time takes Very Short Time Revolving Infrared Preform Heating with Air Circulating System.

 Effective & Efficient Cooling System.

 Due to Servo Clamping Unit Mould Change Over time takes Very Short Time Revolving Infrared Preform Heating with Air Circulating System.

 Automatic Preform Feeding system.

Mineral Water Plant
By Aim Technologies – From 30 BPM to 200 BPM

 

Aim Technologies is a trusted and experienced manufacturer of Mineral Water Plant and Packaged Drinking Water Plants We don’t just supply machines we help build your brand for the last 10 years, we have been helping clients set up their own water bottling plants across India and abroad. We provide complete Mineral Water Plant setup (Fully Automatic or Semi-Automatic) we handle everything from start to finish. We provide customized plant layout and machine arrangement as per available space and required capacity.

3 KVT Pet Blowing Machine

Aim Technologies is a leading 3KVT Pet Blowing Machine manufacturer, exporter in Gujarat, India.

We designed this 3 KVT Pet Blowing Machine to produce more with less money invested. In order for our customer to be able to operate and maintain the fully-Automatic Pet Blow Molding Machine independently (without our help), we simplified its technology. This easily accessible machine can blow up to one liter of drink, water, and many other bottles.

We are an experienced and technically skilled manufacturer of pet blowers for mineral water and cold drink bottles.

Total Power     :            30 KW CONNECTED LOAD ( actual consumption 60 % appx )

 Production       : PET Bottle 28mm neck maximum 200 - 1000 ML,  Mineral water bottle 

 Size                 :           L X W X H :  8.5 x 10 x 7.5 feet appx

 Weight            :                       1500 Kg appx

 Operator         :           One person required to run machine

 Pneumatic        :           SMC

 Mould Locking:           Hydro Pneumatic Type  

 Blowing Valve :           Dif ram Type 

 Mould             :           Two  Piece Mould        Three Cavity

This machine is entirely pneumatic 

Mould will be locked through Hydro Pneumatic Cylinder  

Entire machine pneumatic parts are of SMC only

 The blowing High Pressure and Low Pressure valve are difram type make so for longer production there will be no jam

The Lubrication system given inside machine for  Ty-bars where gunmetal buses used

The microprocessor is simpler normally used in semi gives production cycle time also give us error report for which reason machine get stop.

Extra Filter given for HP and LP line to continuous supply of clean and dry air

3 KVT Pet Blowing Machine

Aim Technologies is a leading 3KVT Pet Blowing Machine manufacturer, exporter in Gujarat, India.

We designed this 3 KVT Pet Blowing Machine to produce more with less money invested. In order for our customer to be able to operate and maintain the fully-Automatic Pet Blow Molding Machine independently (without our help), we simplified its technology. This easily accessible machine can blow up to one liter of drink, water, and many other bottles.

We are an experienced and technically skilled manufacturer of pet blowers for mineral water and cold drink bottles.

 blowing machine configuration

 

Aim Technologies  manufactures excellent quality Automatic PET Blow Moulding Machines for PET bottle production. Our Automatic PET Blow Moulding Machines have wider wide-mouth capability, faster production rates, and shorter changeover times. Also have features such as preferential heating or heat-setting capability. Our Two stage Plastic PET machines can make bottles from round to flat bottle styles. With our two stage Automatic PET Blow Molding Machines you can produce various different shaped PET containers, such as mineral water bottle, beverage bottle, cosmetics bottle, medicine bottle, pesticide bottle, edible oil bottle, milk bottle, Juice bottle and many more types of Plastic PET Bottles 

 

On Line / Off Line Pet Stretch Blowing Machine For Bottles  With Infrared Heating System & 360 Degree Preform Neck Cooling System With  Servo Control System.

 

 One Servo Motor in the Machine Performs Dual Functions in Preform Transfer Mechanism & Bottle Online Transfer, Rinsing, Filling, Capping & Labelling of the Bottles.  Switzerland Make High Pressure Seitz Blowing Valve With "Air Restoration System”.  During Commercial run, While Blowing the Bottle Exhaust Air Released from High Pressure Tank is Transferred to Air Recovery Tank Which Enables to Reduce Low Pressure Air Consumption in the Machine by 40%, Hence No Low- Pressure Air Required and This Regeneration Air can be Used for Filling & Other Caping Machines with the Help of AIR RESTORATION SYSTEM. Servo Top Stretch Bottle Blowing Technology. Due to Servo Clamping Unit Mould Change Over time takes Very Short Time Controls Bottle Transfers Mechanism & Air Conveyer With Blowe.

Aim Technologies is one of the leading manufacturers and exporter of automatic shrink packing machines. Our machinery is made to provide perfect and high-speed packaging performances, thus making us a choice among other enterprises in effective packaging options.

 

We provide a comprehensive portfolio of automatic shrink wrapping machines for packaging water bottles and beverages of different sizes. Food & Beverage, Cosmetics, Pharmaceuticals—from multiple industries, our packing solutions ensure increased productivity and quality.

 

For more information about our high-performance shrink packers, please contact us.

We are a reputed name in the industry, devoted towards offering the best quality array of Semi Automatic PET Blow Molding Machine.

Other detail:

• Owing to their unmatched quality and reliable performance, these machines are broadly demanded by our clients.
• Aim Technologies Offering you a complete choice of products which include Semi Automatic PET Blow Moulding Machine, pharma bottle blow machine, water bottling machine and mineral water bottling plant.
• We had developed this Semi Automatic Pet Blow Molding Machines for getting higher production in minimum investment.
• We had simplified the technology of the Semi Automatic Pet Blow Molding Machines which will help our buyer to use and maintain on his own (without our help).
• This machine is very useful to blow water bottle up to 2ltr, and pharmaceutical bottle up to 1ltr.
• We are manufacturer of pet blowing machine for mineral water bottles and clod drinks bottles with good experience and technical.

Silent Features:

• Manual feeding of two performs into the Infrared Convey or device for heating.
• Easy and safe to operate.
• Lower power consumption.
• Use of the best spares from renowned manufacturers like Mercury, Ultra etc., ensures best product quality.
• Easy change of the mould.
• Programmable process control by PLC.
• Above all our fast and efficient after sales service gives us the cutting edge over competitors.

Bottle Blowing Machine
By Aim Technologies – From 900 BPH to 12,000 BPH

Aim Technologies is a leading manufacturer of Bottle Blowing Machines for mineral water plant, juice, soft drink, and other PET bottle applications. We offer a wide range of blowing machines starting from 900 Bottles Per Hour (BPH) up to 12,000 BPH, suitable for different production needs. A Bottle Blowing Machine converts PET preforms into bottles using heat and high-pressure air. These bottles are then used for filling water, juices, carbonated drinks, etc.

We manufacture different types of blowing machines to match every requirement:
2 KVT – Ideal for small-scale production (approx. 1000 BPH)
3 KVT – Mid-range capacity (up to 2000 BPH)
4 KVT – Popular choice for medium capacity plants (up to 4000 BPH)
5 KVT – Higher production needs (up to 7500 BPH)
6 KVT – Large scale and industrial usage (up to 12,000 BPH)

Features:：

1.Horizontal rotation transfer system make the construction and maintance more easy, reduce cost of spare part change.

2.Compact preform heating distance design for efficient heating and reduce energy consumption.

4.Using hard claw to catch the preform and bottle, resistance to wear with long life.

3.Mould closing adopts CAM linkage, no chain plate pin shaft make it small volume and long lift.

6. stainless steel pipe make the air more clean without pollution.

5.Servo motor drive system with synchronized base blow mould for fast response operation, precision blowing valve for high output. 7.slip for bottle mould make the installation more easy.

 

8.Touch-panel control system for simple operation with 9 inch LCD screen.

 

Aim Technologies Offering you a complete choice of products which include 3 Cavity Automatic PET Blow Moulding Machine, pharma bottle blow machine, water bottling machine and mineral water bottling plant.

 

5Cavity Automatic Pet Blowing Machine

Aim Technologies is a leading 5 cavity Automatic Pet Blowing machine manufacturer and exporter in Gujarat, India.

We developed this 5 cavity Pet Blowing Machine with the purpose of producing more pet bottles. Our main purpose is to let our customers independently utilize and maintain the Automatic Pet Blow Molding Machines by simplifying their technology. This Automatic pet blowing machine works well for blowing soda and water bottles and many others.

With a strong scientific foundation and extensive experience, we are a pet blowing machine manufacturer for mineral water and cold drink bottles.

Aim Technologies Offering you a complete choice of products which include Semi Automatic PET Blow Moulding Machine, pharma bottle blow machine, water bottling machine and mineral water bottling plant.

 

We Aim Technologies are manufacturer and exporter of all kind of packaging machinery.

This is the 5 Cavity Pet blowing machine with 7500 output